GTM962253PWWWVV-P3, ICT / ITE / Medical Power Supply, 60601-1-4th Ed. , Potted, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Contact GlobTek for customization requests on any type of cable in any customer specified lengths., Output Rating: 225 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals: IP68;
The black outlined drawing represents a housing which is being phased out due to end of usable life of the mold used to make it. The blue outlined drawing is the replacement housing. Both may be used interchangeably and mixed within any given lot.
Model Number (Final ordering #/Part No to be defined)
* (Final ordering #/Part No to be defined)
High power density potted construction
Low conducted & radiated EMI: Class B without external filters or ferrites (all input configurations, into resistive load)
Class I, Class II, or Class II with Functional Earth input configurations
ITE/ICT and medical (2 x MOPP) certified (suitable for Type-B or Type-BF applications)
± 2.0% (worst case, set point + load/line regulation)
± 0.5% (measured at connector)
± 0.2% (measured at connector)
1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
<5% deviation (with 25% load step), recovery to within 1% in 1ms
<5% (full load)
10ms min. (full load)
Aux Output Voltage Regulation:
12V ± 2V (10V min. / 14V max.), for 0A ≤ IAux ≤0.8A
Aux regulation guaranteed when main output power ≥ 25% of 140W rating (~34W).
For main output power < 25%, aux output voltage may drop to < 50% of nominal rating, depending on aux output load. Please check with your system. For main output = 12V, aux output voltage is same as main output.
Custom aux output voltages (5V to 12V), available for main output voltages from 12-24V
Individual Box/Gift Box Size (mm)
Individual Box/Gift Box Color
Master Carton Size (mm)
450 x 461 x 182
Gross Weight (kg)
Label Width (mm)
Label Height (mm)
Contact GlobTek for customization requests on any type of cable in any customer specified lengths.
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
Medical 4th Ed.
EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info)
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure