Request Information Download PDF
GTMG3069-05VV-X.X-PP GTMG3069-05VV-X.X-PP
Model NumberGTMG3069-05VV-X.X-PP
DescriptionGTMG3069-05VV-X.X-PP, Medical Power Supply, Encapsulated in plastic housing, Modular Medical Power Supply, , Input Rating: 85 ~ 264VAC, 125 ~ 373VDC (47 ~ 63Hz), Solder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins, Output Rating: 5 Watts, 5-24V in 0.1V increments, Approvals: CE China RoHS WEEE GOST-R Ukraine VCCI RoHS 2 cUR PSE Double Insulation cUL
Agency Documents
CE EC-Declaration for Medical
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TypeEncapsulated in plastic housing
TechnologyModular Medical Power Supply
CategoryMedical Power Supply
Input Voltage85 ~ 264VAC, 125 ~ 373VDC (47 ~ 63Hz)
I/P Amps (A)0.13 A / 115VAC, 0.08A / 230VAC
Wattage (W)5
Vout Range (V)5-24
Ingress ProtectionIPX0
Size (mm)50.0x19.7x62.85
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTMG3069-0505-PP 515 RFQ
GTMG3069-0512-PP 120.425.04 RFQ
GTMG3069-0515-PP 150.334.95 RFQ
GTMG3069-0524-PP 240.215.04 RFQ
Universal AC input / Full range
Medical safety approval: ANSI / AAMI ES 60601-1 / TUV EN 60601-1: 2006; IEC 60601-1 / 2xMOPP
Isolation class Ⅱ
Green design, No-load power consumption < 0.3W Protection: Short circuit, Over load, Over voltage
Brown-out (Low AC Input Voltage) High operation temperature up to 70°C Withstand 2G vibration test
3 years warranty


DC Voltage Range: 5V 12V 15V 24V
Rated Current: 1A 0.42A 0.33A 0.21A
Current Range: 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A 0 ~ 0.21A
Rated Power: 5W 5.04W 4.95W 5.04W
Ripple & Noise (Max.): 2 100mVp-p 150mVp-p 150mVp-p 240mVp-p
Voltage Tolerance: +5 / -3%
Line Regulation: Note.8 ±0.5%
Load Regulation: Note.8 ±1% ±0.5% ±0.5% ±0.5%
Setup, Rise Time: 100ms, 25ms / 230VAC, 100ms, 25ms / 115VAC at full load
Hold Up Time: 100ms / 230VAC, 25ms / 115VAC at full load

Voltage Range: 85 ~ 264VAC, 125 ~ 373VDC
Frequency Range: 47 ~ 63Hz
Efficiency (Typ.) at 230VAC: 71% 75% 75% 77%
AC Current (Typ.): 0.13 A / 115VAC, 0.08A / 230VAC
Inrush Current (Typ.): Cold Start 25A / 115VAC, 45A / 230VAC

Over Load: Above 110% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage: 115 ~ 145% rated output voltage, Protection type: latch-off mode

Working Temp.: -20 ~ +70°C (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.03% / °C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC
Safety Standards: Certified UL / cUL (ANSI / AAMI ES 60601-1; CAN / CSA-C22.2 No.60601-1); NFPA 99
Certified TUV (EN 60601-1; IEC 60601-1); MOPP approval

Withstand Voltage: I/P-O/P: 4KVAC
Isolation Resistance:I/P-O/P: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55011
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 60601-1-2; IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF: 217.4K HRS Certified MIL-HDBK-217F
Dimension (WxHxH): 50.0x19.7x62.85 mm / 1.969x0.776x2.474 inch
Packing: 0.08kg; 144pcs / 12.52kg / 1.43CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 10% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Length of setup time is measured at first cold start. Turning ON/OFF the power supply continuously may increase the setup time.
8.The line regulation and load regulation are calculated based on output voltage.
Derating CurveUser-added image

Qty (ea.)/Carton144
Individual Box/Gift Box Size (mm)70*55*27
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)12.52
Label Width (mm)TBD
Label Height (mm)TBD
Input Configuration
DescriptionSolder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added imageUL60950-1, cULus to UL 60950-1 E170507
User-added imageUR 60601-1, 3rd Edition, CAN/CSA-C22.2 No. 601.1-1
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
GOST-R mark for Russia(Document: 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan:
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case

Request Info